Hardwood floor Products Species from All Hardwood floor Ltd Vancouver

WE offer All Hardwood Species as install sanded and finished on site floors that make sense as a warrantable product. Hardwood species typical are : American Black Walnut, American Cherry, White Oak, Red Oak, Beech, Ash, Cypress, Teak, Hickory, Wenge, Maceranduba, Paraju, Brazilian Cherry(jatoba), Indonesian Cherry(merbau),Purple heart ,Fir, Alder, Pacific Maple, Eastern Hard rock Maple, Silver Maple, Birch, Bamboo, Rosewood, Elm, Larch, Jarrah, Santos mahogany, Cork , Doussie

List of Hardwood flooring Services to accompany Hardwood floors unfinished and prefinished:

Stair sets landings and custom feature stairs of all designs regardless of their design including custom Rounds. spiral or 30degree winder.

NEW STAIRS are Installed to EXACT BUILDING CODE TOLERANCES including dressing the sub frame and completely Urethane glued.

Supply of top quality Unfinished Hardwood flooring materials: T&G or square edge flooring

Bostik's Best urethane Glue (tm)is our first choice for concrete plywood and under lay materials .

Hardwood in first grade for Glue down to Dura-son or cork to meet the 74 STC rating, Ply wood or Concrete Slab ( Maple Walnut Cherry and Quarter sawn Red & White Oak)

Supply and Installation of all types and species ( various manufacture) pre finished hardwood floors: Haro(TM) Accra(TM)

Site finishing and Refinishing of All Species of Hardwood floor floors flooring and stairs.

All Finishes Available: Glitsa(tm) Swedish Finish(Conversion Varnish), Environmentally friendly, Water based and borne(opaque) finishes. Non slip finishes Regular polyurethane (oil modified) & M37/ MCU moisture cured urethane.

Restoration of hardwood floors: Including wire brushed after fine sanding heritage floors, Scalloped Distressed dual tone antique.

Repairs to most site finished floors: board replacements in nailed down floors and Urethane glued down floors; Re sanding finishing.

Finishing with All types of coatings. Glitsa (tm) Synteko (tm) Swedish Finish/ Moisture cured urethane / StreetShoe (tm)

Gymnasium Game court markings or game lines ( it is possible to remove and replace just the lines )

Wood flooring sanding Wood flooring sanding With The best American made work safe BC certified Dustless Floor sanding machinery

Refinishing wood flooring is quite a complicated task that requires a bit of patience along with the right amount of expertise in order to do it perfectly. If you are thinking about applying a new finish to the wooden floor in your house, you first need to go through the process of sanding your wood flooring to remove the old finish. Also, be sure to repair any old scratches and grooves. If you already have knowledge about sanding wood flooring, then you are ready to begin. If you don't have the required knowledge, it would be best to hire a professional that specializes in sanding wood flooring in the Vancouver area to get the job done for you. You can find a number of competent contractors that have knowledge about sanding wood flooring in North Vancouver. There are plenty of contractors available to get the sanding done and offer quality work at affordable rates. It is a good idea to rent a commercial grade wood floor sander in Vancouver because they make your sanding job much faster and easier. The procedure of Wood flooring sanding involves of hammering down (setting) all of the raised nails and pulling out all of the staples from your flooring before sanding. Then sander is used on the wooden floor to slowly smooth the grain of wood. The old finish and sanding Dust is removed by our American made Work Safe BC certified Dust containment system. That is how sanding is done before refinishing the wooden floor. More....

Wood flooring refinishing restoration, resurfacing – Giving beautiful look to your house

If you are looking to have your wood flooring refinished, then you can hire a professional from AHF Allhardwoodfloor Ltd Vancouver Wood Flooring Refinishing . This company can provide you with the reliable and competent service that you are looking for. They are highly trained and can give a beautiful look to your house. Keeping the wood floor looking shiny and beautiful takes a bit of effort along with the proper periodic maintenance. The flooring in your house takes a lot of punishment daily, so it needs proper maintenance for it to last longer use. After many years, flooring tends to develop scratches and the finish becomes very dull in appearance. So in order to get the shine back, it is important to hire a professional from Wood Flooring Refinishing Specialists AHF-Allhardwoodfloor Ltd. This company is specialized in providing the various wood flooring services, and are competent enough to provide a refreshing look to your wood flooring. Trying to accomplish the task yourself would not be a good idea because this job requires expertise. It is also a very tedious task to do and, so it is always better to rely on the wood flooring service experts. They are extremely professional with many years of experience and competency to do high quality work. You can find many reliable and experienced companies for this job at http://allhardwoodfloor.com . It is always better to do a thorough search before choosing any of the wood flooring refinishing companies.

Re-finishing and sanding your hardwood floors is necessary in order to preserve their quality and beauty. Re-finishing is carried out solely as a way of enhancing the wood’s natural color and to give it protection it from the elements.

The best time to sand and re-finish a hardwood floor is when moving into a new house or apartment, as all of the furniture, rugs, etc. will need to be removed from the flooring anyway. Carried out properly, a re-finishing should last around ten years. However, high traffic rooms will need to be re-finished more frequently.

A relatively new, but increasingly mainstream, product. Pre-finished hardwood floors can be acrylic impregnated, engineered, or solid. They have a tough factory finish, which is the main reason for their popularity. They are also extremely easy to install and eliminate the need for messy sanding.

Most prefinished floors constructed within the last ten years are urethane- finished. If you’re unsure that you have this kind of floor, you can test it by placing a couple of drops of water on an inconspicuous area. If, after 15 minutes, it turns white, this is your finish

There is a dustless sand less system for all alum-ox acrylic . Finished floors called TY-Kote(tm)

Older floors, on the contrary, are likely to come in shellac or varnish finishes. Unfortunately, these do not work well with urethane and need to be completely removed before you can apply urethane. If you do decide to replace an older finish with that of urethane, you need to be aware that there is likely to be a certain amount of aluminium oxide in the floor.

Unfinished Hardwood Floors Installed to be Sanded and finished on site after the hardwood floor installation is complete

To avoid such problems, we make sure to allow as much time as possible to elapse.

If your floor has a limited amount of surface wear, we also offer screening (also known as buff and top-coating). In essence, this will give your wood surfacing a new lease of life, ‘freshening’ it up. Screening allows the wood to be given another coat of finish and frequent applications can minimize the need for a complete re-finishing.

Screening enables the surface to take another coat of finish, and frequent applications can reduce the need for complete re-finishing. However, if you have a waxed hardwood floor, screening is a difficult process to carry out, unless all of the wax is first removed from the floor.

Our re-finishing service is guaranteed to leave your floors looking absolutely beautiful. We guarantee your complete satisfaction, so call us now for a free, no-obligation estimate, at your home, with one of our crew.

These can be both solid and engineered, but both kinds need to be finished entirely on site. They come in varying lengths and widths. Sanding and finishing can take anywhere from a few days to a week depending on the floor

As with re-finishing, it is important to make sure there is as little air flow as possible in the area, not just to prevent breathing difficulties but because airborne particles can become embedded in a newly-applied finish. Something as simple as walking on the floor, or even turning on an air conditioner/heating system, can stir up a great deal of dust.

size, stain, and number of top finish coats required. Generally, finishes used are oil or water-based.

Our highest priority is to give you a beautiful floor, but at the same time protect the rest of your home. So whether you have chosen finished or unfinished floors, we will section off other areas and furniture in your home, to prevent sanding dust from spreading. Our dedicated and dependable crews are also experienced in using dust-containment systems, which limit the amount of dust that becomes airborne.

There are six general types of grain:

Diagonal Grain

When a straight-grained log is not sawn along its vertical axis, diagonal grain is the result.

Spiral Grain

When trees grow twisted, spiral-grained logs and subsequent boards are produced. Fibers follow a spiral course with a twist that is either left- or right-handed.

Straight Grain

The board's fibers run approximately parallel with the vertical axis of the log from which it originated.

Wavy Grain

This type of grain results when the direction of wood fibers has constantly changed.

Irregular Grain

Boards of this type have fibers at directions that are varying and irregular from the log's vertical axis (for example: fibers around knots).

Interlocked Grain

Boards with this grain result from trees whose fibers lined up in opposite directions in each growth year.

Grain pattern density determines strength. As you'd expect, a piece of lumber with a tight pattern is stronger than one with a loose grain pattern. And when building, a board's strength is maximized when other pieces run across the grain pattern — not parallel to it.

Choosing wood flooring for decorating a new home is obviously the best decision, however, selecting the right material and appropriate services is more vital. There is variety of wooden materials that is available and offered by a number of companies. It always makes better sense to choose the Wood Flooring Installation services for Value and your decorating needs. We have a wide variety of wooden materials ready to be installed. We assist our customers in choosing the right materials that perfectly matches with the interior decoration of their home. Further, our flooring materials add an elegant radiance to the home. Some of the different wooden materials that are used to create the floors include oak, pine, maple, walnut, mahogany, teak, and many more. Each type of material is offered in assorted patterns and designs. We also offer more exotic types of materials such as engineering and acrylic based woods to suit our clients' needs. While offering a plethora of designs, we likewise ensure that Wood Flooring Installation services are highly affordable. We are definitely competitive. Further, there is no compromise on the quality of the materials we utilize or the services we provide. The floors installed by us are durable, cost effective and enrich the entire visual aspect of your home.

And the peace of mind that your investment in hardwood flooring did add great value.

It always seems to be stressful when it comes to selecting hardwood materials for your flooring. Hardwood flooring materials can be broadly classified into two categories, which are unfinished materials and prefinished materials. Our contractor services offer both of these types of floor materials in a wide assortment of patterns. It includes solid and engineered floor materials that are available in an assortment of thicknesses and lengths. All Hardwood Floor Ltd Hardwood Floor contractor services offer you a broad range of patterns with many different finishes and colors that offer your home an extremely luxurious appearance. People typically opt for engineered prefinished materials due to a low cost and high durability. Satisfying the needs of the customer by offering the desired choice of material, hardwood flooring installation NY services offers something beyond the conventional methods of installing wooden flooring. Though the cost of this kind of flooring is already highly affordable, our services bring you lavishness at a great deal. In addition, all of the materials that are used in hardwood floor installation are eco-friendly, which means that they are safe for environment. They are not only user friendly, but a great convenience for customers.

Hardwood floors are an excellent financial investment - with the proper installation and care, they will last for years. Here at New York Wood Floor, we employ different installation methods depending on what kind of flooring you choose (for example, engineered wood strips, solid wood strips or parquet).

But whichever method of installation is used, moisture testing is imperative to ensure the job is done properly. The installation of wood flooring is a painstaking process, which is why you need professionals you can trust. We promise to leave your home looking beautiful, because we take pride in our work. Our crews both reliable and experienced – they have seen every kind of situation and are proficient in the three different types of installation used with hardwood flooring.

With this method, we will nail down or staple solid or engineered wood strips to the sub-flooring (which usually is made either of plywood or plank wood). The floor is laid with random length strips – a few are placed down and arranged prior to fastening, to ensure proper placement and tautness.

This kind of installation involves gluing down engineered wood strips or parquet directly to the sub-floor. In such cases, the sub-floor is usually concrete, so extra attention needs to be paid to the question of moisture.

With glue-down installations, it is important to point out that homeowners with allergies or sensitivity to smell may experience some discomfort in the installation. Having said that, New York Wood Floor uses an acrylic-based glue, which is relatively mild.

Glue-down installations can be walked on in no time at all – usually the following day – and furniture can also be moved back in to the room

When it comes to floating installations, the tongue and groove of every plank is glued together, leaving the flooring ‘floating’ over a foam-cushioned padding. If the flooring has a locking system, pieces can be fitted together without glue.

This is a method that is used both with laminate and engineered wood - in both cases the flooring is pre-finished. Floating installations can also be placed over sub-flooring of more questionable quality, which is not possible with nailing-down and gluing-down. As a general rule, laminate flooring gives a hollow feeling underfoot, with this particular method.

Another factor is the ‘wear’ layer - the thicker the layer, the more times it can be re-finished.

Finally, it’s important to remember that ‘floating’ floors expand and contract as a whole, because all of the pieces of wood have been fused together. You will need to allow for such expansion.

Our comprehensive service ensures that no detail is overlooked. We will determine the temperature, evenness of the sub-floor, and presence of moisture and sound barriers, before we even begin work. Whichever installation you choose, we guaranteed that you will be satisfied with the quality of our work and the finished product.

Staining and bleaching is an excellent way to make a real change in your home, without too much disruption or cost.

Here at All Hardwood floors Wood Flooring, we offer a wide range of options depending, of course, on the exact flooring you have installed.

One popular choice is to lighten the color of your wood – which we can do by bleaching it. This is an excellent way to change its appearance, and with no damage to the wood itself.

Your floor will have a different tone, or shade, giving a whole new feel to the room.

Every one opts for wood or hardwood floors to get the ultimate lavish appearance to their home. Mostly, the floors are durable and are not exposed to tarnish for decades. Sometimes, however, due to rough usage, any kind of floors will obviously get damaged with scratches. If you wish to make your floors clean and beautiful, Professional Staining is a custom solutions and is the ideal choice. Vancouver Hardwood flooring can be offered staining solutions in a professional way that enriches the beauty of the floors. Further, it adds a more luxuriant value to any kind of interior decoration. Staining is actually considered to be an internal process of hardwood floor refinishing. We stain the floors by buffing them and then by applying the finishing touch which makes the floors look more elegant with a glossy look. Our staining services are offered with two different concepts, which are staining the floors to completely change the color of the floors or cleaning them to offer a neat and tidy appearance. Oil based stains in the preferred color choices offer a greater glossy look. Yet, the process of staining is done with the ultimate objective and intention to enrich the value of your home.

Most people look forward to renovating the home at various intervals, which typically includes refurbishing the wooden floors. Various methods of renovating and finishing treatments are offered by different companies. However, the radiance and magnificence of the home can undoubtedly be enhanced by wood flooring bleaching . Bleaching hardwood floors is the ideal and easiest method to use that will your home appear more refined. The wooden or hardwood floors can either be tinted to a darker shade or lightened. Lighter shades can transform the hardwood flooring of your home to have a more graceful pastel and pristine look that will match perfectly with trendy furnishings. Custom `professional Bleaching services assist and guide our customers to choose the appropriate shade for bleaching their wood floors. Further, we are extremely careful with the floors and never use any harsh chemicals or solutions for bleaching. This never spoils or damages the floors. Hardwood Floor refinishing resurfacing restoring and repairing services bring out the warmth of the flooring and make it appear classier. On the whole, bleaching solutions makes your floors smoother and gives them a magnificent look.

Every wood has its own natural color pigmentation. Staining is simply the process of adding or removing color to the wood, by a process known as bleaching.

Which will bring out the patina effects and tend to look ultra even when the floor finishing curing process has matured

A basic definition of prefinished flooring is when the boards that are to be installed already have finish on them. In fact, most companies put from 5-9 coats of finish on their prefinished wood.

Prefinished Hardwood floors are quite popular right now, because they have many advantages over the alternative, site-finished floors:

For most people, the only disadvantage to prefinished flooring is #2. Since the floor is not sanded after it is installed, there will be unevenness that the installer has no control over.

Nail holes/heads. The installer should set all nails and fill all holes. As a result, there should be no visible nail heads or nail holes. However, if you kneel down and look closely, you should be able to find where the nail holes used to be, because no wood filler (or wood putty) can be a perfect match to a wood grain.

Also, there should only be a few nail holes in most floors. In fact, most of the time, a simple, square room can be installed without any nail holes at all. But keep in mind that many situations will require a board to be top-nailed, resulting in nail holes.

Cracks and Creases. Any time a board comes together with another board, it forms a crease. These creases are what make hardwood floors look how they do. On a prefinished floor, these creases are much more pronounced, because the edges of each board are beveled down at about a 45 degree angle. there is nothing the installer can do about these bevels, except to sand down the whole floor and refinish it, which negates the purpose of a prefinished floor, and is not the installers responsibility (In other words, you would have to pay extra for it (probably at least $2.50 per square foot extra)).

When you look at a hardwood floor, there are the creases that go along the length of the wood, and go all the way across the floor (with the grain), and there are small creases in-between boards in the same row (against the grain). The smaller creases, as a general rule, should be fairly evenly distributed around the floor, with none coming within 6 or 8 inches of each other. Seams that are close together, or clumped in one area, leaving another area somewhat seamless, are the signs of a poor installation job. They are not, however, a good enough reason to demand that your floor be ripped up and reinstalled at the installers expense. Usually in those cases, you’ve hired a very inexpensive installer, and you got what you payed for. If it is a big deal to you, you might talk about getting the floor redone at a discounted cost.

Any crease in a wood floor has a chance of becoming a crack, for various reasons. One may a milling imperfection in some of the boards (such as one board being slightly thinner than another).

Expansion and contraction may be another reason a crack might open up. In general, wood will expand in the summer and contract (shrink) in the winter. This causes gaps to open up between boards. It is not always good to fill these cracks, because when the boards expand again, it could push the filler out, or even buckle the wood. The best way to avoid these cracks is to keep the moisture level in your house constant. Where we live in Colorado, that means using a humidifier. In many other places, you may need a dehumidifier. There are many types of humidifiers and dehumidifiers out there, so before making a decision, you should shop around. A great place to start is a site I found devoted to dehumidifier ratings. You’ll find a lot of good info there.

On the other hand, cracks that are caused by milling imperfections or installation mistakes/problems, should be filled by the installer (with the possible exception of smaller cracks if significant expansion is expected after the installation).

After installation, there should be (in most cases) no visible cracks when viewed semi-casually from a standing position (and without a magnifying glass, please).

Scratches, gouges and other surface problems should not be visible when the installer is done. If the board was damaged when it arrived at your house, the installer should not have installed it. If it happened after the installation, but the damage was caused by the installer, he/she is responsible to fill it, fix it, or replace the boards affected. If, however, the damage is caused by another contractor or worker, or any residents, guests or pets in the house, the installer is not responsible to fix it, and is perfectly within his/her rights to charge extra if you want it fixed (However, charging extra to fix one small scratch that he/she can fix in two minutes, may be considered a little rude).

Expansion Gaps. Because wood expands and contracts (due mostly to changing humidity and temperature), installers will leave expansion gaps between the wood and everything else (walls, other floors, etc.). In general, these gaps are between 1/4 inch and 1/2 inch. This can create a problem sometimes on remodeling jobs, especially in kitchens.

Many houses do not have any trim (or baseboard) around the bottom of the cabinets in the kitchen. When wood floors are installed in these conditions, there will be a visible, ugly expansion gap left over. The homeowner should work with the installer to select (and pay for) a baseboard, trim, or caulk solution.

Baseboards. It is common for the installer to remove and reinstall baseboards when he is hired to install a floor (for a price that should be included in the estimate). This can sometimes cause problems with older baseboards. The installer is responsible for any damage done to the baseboards due to his/her own negligence or hurriedness. The installer is not responsible for any damage that already existed, or that occurred because of the brittle state of the baseboards or excessive fastening to the wall (i.e. too many nails and/or glue). Be prepared to deal with at least one broken piece of baseboard. Many times the damage can be fixed with a little painter’s caulk and a coat of paint, so don’t get too broken up about it.

In conclusion, please remember that it is a floor and it’s meant to be walked on. If you get down on your hands and knees and study the floor, you will find cracks, holes, scratches, and many other imperfections. When inspecting a floor, it should be done from a standing position in normal light. If you can see problems from that position, that is when you should point them out to the installer. People who refuse to pay because of common imperfections that are expected in wood floors are setting themselves up to be blacklisted or overcharged by other contractors in the future. Nobody wants to deal with an unreasonable customer.

ABRASIVES & RESURFACING WOOD FLOORS TYPES OF HARDWOOD FLOOR COATINGS & Hardwood floor Finishes

Wood Floor Finishes create lasting beauty and requires minimal care with today's modern technology in wood floor finish products. The right finish protects wood flooring from wear, dirt and moisture while giving the wood an attractive color and sheen. Today most wood floors are finished with a stain and a top coat. Technology has provided a wide selection of wood flooring finishes, each with its own distinct benefits and appearances.

Surface Wood Floor Finishes - Surface finishes are very popular today because they are durable, water-resistant and require minimal maintenance. Surface finishes are blends of synthetic resins. These finishes most often referred to as urethanes or polyurethane's remain on the surface of the wood and form a protective coating. They are generally available in high-gloss, semi-gloss, satin and matte. Any one of the surface finishes are appropriate for the kitchen.

1. Oil-modified urethane is generally the most common surface finish and is easy to apply. It is a petroleum base with a blend of synthetic resins, plasticizers and other film forming ingredients that produces a durable surface that is moisture-resistant. It is a solvent-base polyurethane that dries in about eight hours. This type of finish ambers with age. and comes in different sheen levels.

2. Moisture-cured urethane is a solvent-base polyurethane that is more durable and more moisture resistant than other surface finishes. Moisture-cure urethane comes in non-yellowing and in ambering types and is generally available in satin or gloss. These finishes are extremely difficult to apply, have a strong odor and are best left to the professional.

Curing of this type of finish is by absorbing minute quantities of moisture vapor from the air, which causes them to dry and harden. The curing process is very dependant on relative humidity.

3. Water-based urethane is a water-borne urethane with a blend of synthetic resins, plasticizers and other film forming ingredients that produces a durable surface that is moisture-resistant. These finishes are clear and non-yellowing and are different sheen levels. They have a milder odor than oil-modified finishes have and they dry in about two to three hours. Water-based urethanes are generally more expensive.

4. Conversion-Varnish Sealers-(Swedish Finishes)- A two-component acid-curing, alcohol-based sealers. Because of their origin (country), conversion varnish sealers are often referred to as Swedish finishes and are the very best of the best when it comes down to the soft subtle look and the graceful appearance as they wear with great durability

5. Penetrating Sealers - These sealers are spread on the floor and allowed to penetrate and are solvent based. The excess sealer is removed with rags or buffed in with synthetic or steel wool pads. This type of finish often have a color and can be used to stain and seal the wood floor. Penetrating Oil Sealers are made from tung or linseed oil, with additives improve drying and hardness.

6. Paste Wax- The oldest, and in some ways the best. Wax is the easiest to apply, least expensive, fastest drying, easiest to repair, and with proper care will survive forever. Wax over a penetrating stain, and the system is in the wood so you wear the wood, not the finish. Wax is spread in thin coats for a surface protection after the stain and/or sealer is applied, then buffed to the desired sheen.

7. Varnish- Vinyl-alkyd varnishes have superseded natural varnish made from vegetable oils. This product was commonly used before urethane finishes where introduced.

8. Lacquer - The flammability and incompatibility of this floor finish is NOT a recommended by many manufacturers. This finish should avoided.

9. Shellac - This product (natural shellac) contains wax and is not widely used for top coating in today's wood flooring market. Dewaxed shellac is becoming used more and more for a wood floor sealer.

NOTE: Inspection of wood floor finishes should be made from a standing position (five feet up and two feet away) with normal lighting. Light glare from windows, added lighting (flood lights) magnify any irregularities in the floor surface and should NOT determine acceptability of the finish.

All Floors & Stairs installed sanded finished AHF All Hardwood floor Ltd. 6046037317 (Burnaby Vancouver Coquitlam)

AllHardwoodFloor Ltd. is a service based business I supply and Install Sand and finish All types and applications of hardwood floors and stairs:

Installation of stairs including trueing or plumb the stringers, Remove and replacement of stringer, comply with tolerance codes.

Cherry's are good for nail down flooring. American Cherry, Brazillian (JOTABA) or Indonesian( MERBAU)

American Black Walnut Is by Far the finest Hardwood floor you can Own.) if you like dark.

All the Fine Quality good for a life time Stair Sets Are truly the focal point of your home business or institution.

Stairs are available to go or every different sub strafe wood or concrete radiant heat slab .

Supply of top quality Unfinished Hardwood flooring materials: T&G or square edge flooring

Bostiks Best urethane Glue is our first choice for concrete plywood and under lay materials .

Hardwood in first grade for Glue down to Dura-son , Ply wood or Concrete Slab ( Maple Walnut and Quarter sawn Red & White Oak)

Supply and Installation of all types and species ( various manufacture) pre finished hardwood floors:

Restoration of hardwood floors: Including wire brushed after fine sanding heritage floors, Scalloped Distressed dual tone antique.

Repairs to most site finished floors: board replacements in nailed down floors and Urethane glued down floors; Re sanding finishing.

Finishing with All types of coatings. Glitsa (tm) Synteko (tm) Swedish Finish/ Moisture cured urethane / StreetShoe (tm)

Gymnasium Game court markings or game lines ( it is possible to remove and replace just the lines )

Other Fine Trades Available for :High End Millwork , Wood turning , Moldings or base board ( when you employ AHF)

Polished Professionals
Everyone loves the beauty of a polished hardwood floor. You can get that cozy elegant look from the experts at Allhardwoodfloor Ltd. They specialize in fine wood craftsmanship, and with over two decades in the industry, know what they are talking about. Admitted perfectionists, they’ll advise you on the best type of flooring for your needs.

The Rich Beauty of Wood
The staff will be pleased to help you select from a range of grains and woods including maple, oak, ash, birch, beech, and walnut. Or choose a more exotic look such as mahogany, cherry, Brazilian, hickory, bamboo, or cypress. You’ll be able to determine whether you want flat, vertical or horizontal grain, depending on the type of wood. And for hardwood floors, the hardness of the wood does matter; especially where there is apt to be more wearing, such as children’s play areas or entrance halls.

Customer Service a Priority
With attention to customer service from start to finish, the experienced professional installers will ensure your floor has just the right look and finish. And the service doesn’t stop with installation. They will also help you care for your new floor, and ensure that its beauty lasts. Tips for keeping your hardwood floors in top shape include keeping your home at a constant temperature and humidity to prevent warping, shrinking, or expanding of the floorboards. They also recommend protecting the floors by putting felt pads under the legs of your furniture and avoiding liquid spills that can damage the floor. Needless to say, dropping ice skates or bowling balls on the floor will not be covered under any warranty!
http://allhardwoodfloor.net

100% track record with customer satisfaction a priority.